-
Hey having a bit of a issue with using the Device parameters (configuration.yaml) function of this to try to add a temperature readout to my AC
`tuya_custom:
devices_config:
- device_name: …
-
Quantify:
- [ ] Amount of hosts and services probed by (a) Shodan only, (b) Censys only, and (c) both.
- [ ] For the services probed by both Shodan and Censys, compare the information each provide…
cunha updated
11 months ago
-
Hi
In the last version it displays the angle nicely but shows the Spindel temperature - 0 degrees.
A similar problem is when entering Original Gravity and Specific Gravity - converted to 0 degrees.…
-
On startup, I get lots of these errors in the log:
```
2024-02-04 11:45:05.302 ERROR (MainThread) [homeassistant.components.sensor] Platform open_epaper_link does not generate unique IDs. ID ap_ip…
-
In the TTN Mapper database there are invalid measurements recorded from LGT-92 devices. These invalid measurements are reported at location 24.35,24.35.
Please use 0,0 as a placeholder location wh…
-
Hello,
I have 4 F523 actuators in my home which control corresponding loads, with no power consumption measurement; when I configure these devices inside configuration.yaml, I get no functions that…
-
I've noticed that when the device (Rev F) is first powered on, setting the channel mode to SVMI puts 2V across the channel output. This means if I want to do a DC measurement using the following:
`…
-
At the moment, we use SERIAL IDs in the `measurement_data` relation: https://github.com/nsg-ethz/autopower/blob/956049c2fef02fe1763eb596110164ac253092c1/server/database_schema.sql#L49
Since we will c…
-
**What would you like to be added/modified:**
This issue aims to achieve federated incremental learning in the case of sparse samples in KubeEdge-Ianvs, combining the advantages of existing federat…
-
### Expected Behavior
All plots display each equivalent measurement on mobile devices
### Actual Behavior
Plots are cutted and not every measurement is plotted
| Full Extent | Zoomed In |
|-|…