-
I have a FSESC V 6.7 and currently, VESCT Tool can't read or write motor configurations. I forked a version in July, this worked well until i updeatet it two weeks ago. I had a look into the whole mor…
-
[US-675]
Alimentando a API manualmente para que exiba outras vagas além de programadores, abrangendo também outras áreas.
Na US, indicava-se como se fosse um problema de código. Porém, conversand…
-
In the FINESSE rig, the stepper motor can only move to angles between 0 and 270 degrees, because there are two limit switches. (This is an artificial limitation: the hardware will not be damaged if th…
-
I'm trying to add an item to the queue using the bluesky-queueserver-api package. It receives a response from the queueserver saying that ``Plan validation failed: Unable to generate pydantic-core…
-
**Describe the bug**
When configuring multiple motors geared differently, the optional gear train param to the `Motor()` command doesn't seem to be honoured.
**To reproduce**
Steps to reproduce …
-
After a failed autonomous run, some motor-driven systems are not properly reset to their init state. This changes the "zero" value, offsetting encoder positions. Make a cleaner system to allow manuall…
-
I am trying to build this kit using a Pico WH instead of a regular Pi but cannot get the wiring correct at all. I found the [pin layout ](https://pinout.xyz/pinout/camjam_edukit_3_motor_controller_boa…
-
When I plugged in the 330s into the driver board (without a voltage reducer), which was plugged into the 12V power adapter, it immediately went up in smoke... am I supposed to use the voltage reducer …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Setting flow rate value (via M221 or LCD interface) lower then 100 results in the extrusion r…
-
Hi. I have a B-G431B-ESC1 and use it do drive a motor.
Now I have the following problem: when I use TPDOs, a FOC Duration Error gets triggered as soon as the MC_StartMotor1() function gets called. …