AlexanderKoch-Koch low_cost_robot issues

AlexanderKoch-Koch / low_cost_robot

MIT License

2.67k stars 205 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Can I use the Xiaomi CyberGear motor? It's more affordable.

#37 lizhi2013 opened 1 week ago
0
Waveshare board issue?

#36 yudhisteer opened 1 week ago
1
There are no simulation for 6dof arm?

#35 ex3ndr opened 1 week ago
0
Is it possible to avoid or replace HN11-I101 Set since it is out of stock?

#34 ex3ndr opened 1 week ago
0
Add ROS2 package `low_cost_robot_description` for follower arm URDF

#33 tc-huang opened 2 weeks ago
0
URDF with extension?

#32 Tianchong-Jiang closed 2 weeks ago
3
the 3D printed base for follower arm is not strong enough?

#31 jimtangshfx opened 3 weeks ago
2
Updated arm.step and arm.stl to align the screw holes of XL330_to_XL330_straight and the gripper

#30 tc-huang opened 1 month ago
0
Discord server or QQ群 for discussions?

#29 Leonmel opened 1 month ago
0
关于Dynamixel XL330-M288的个数问题

#28 dawangwhere opened 1 month ago
2
Add designs for c-clamp and taller leader base

#27 radekosmulski opened 1 month ago
0
Scanning motors bricked my small motors

#26 jzxchiang1 opened 1 month ago
3
The third servo cannot support the entire arm

#25 starjokers opened 1 month ago
2
Efficient and Affordable Robot: A Low-Cost Solution for Everyday Automation

#24 vijayleo31 closed 1 month ago
1
on-wrist camera

#23 lliuz opened 2 months ago
1
Add vr controller

#22 LouisFoucard opened 2 months ago
3
Adding buying links for europeans.

#21 Felixhuangsiling opened 2 months ago
0
How do you control the robot arm?

#20 johnnevins opened 2 months ago
2
How to connect the leader arm with the follower arm?

#19 yongle20078 closed 1 month ago
0
Print Dragging for elbow_to_wrist_extension

#18 graham-fleming closed 2 months ago
0
ignore (duplicate)

#17 LouisFoucard closed 2 months ago
0
Apple Slilicon Issues with Dynamixel Wizard

#16 ControlCplusControlV opened 2 months ago
11
Might want to recommend a different way to set the voltage

#15 johnowhitaker opened 2 months ago
2
Any ideas on how to debug flakey dynamixel connections?

#14 moaazsidat closed 2 months ago
2
AI training

#13 vateseif closed 2 months ago
0
Where is the code used for training located?

#12 ZhangWuWei opened 2 months ago
2
Resolved the conflict between the Dynamixel item name, buying link, and specs in the README.md

#11 tc-huang closed 2 months ago
0
Mujoco simulation

#10 antonioarbues closed 2 months ago
0
What is the load capacity of this robotic arm?

#9 heroacool closed 2 months ago
1
Updated README

#8 KevinyWu closed 2 months ago
0
How do you wire the leader arm + where does the 6th servo go?

#7 ControlCplusControlV closed 2 months ago
5
Longer servo connector

#6 trzy closed 2 months ago
2
Trying to figure out if wrist is supposed to be rotatable during assembly

#5 moaazsidat closed 3 months ago
2
Hardware

#4 gautam1858 closed 3 months ago
1
Update README.md

#3 eltociear closed 3 months ago
0
Add base STL

#2 moaazsidat closed 3 months ago
1
Smaller servos are unclear

#1 thomwolf closed 3 months ago
1