-
Hello, sorry for my English. my question is if it is possible to send the outside temperature data from a sensor that is inside homeassistant to the boiler. From what I see, you can read the temperatu…
-
Hi,
When PID climate controller is in "heating" mode, the pump is circulating water in the radiators.
When hot water is required, the three way valve shuts but the pump is still running.
So there…
-
Hi code owners and contributers,
many thanks for this project. Heishamon allowed me to optimize jeisha performance to my quite sensible existing hydraulic system.
I control my heatpump using Node …
-
Do you have any roadMap for your product?
I think will be great to use this SLS gateway on DIN rail.
Also will be good to use DIN Relay for manage for example all lamps from 1 place
-
Hi,
I am very new to github so not sure if this is the right way to go about things.
I have modified my copies the scripts to allow setting of the maximum modulation (MM=) and max central heating …
-
Note! This is a follow-up to https://github.com/meatpiHQ/wican-fw/issues/3 (which should be moved to [discussions](https://github.com/meatpiHQ/wican-fw/discussions) as only suggestion for Home Assista…
-
Please write here the name of your boiler and its compatibility features (what works, what doesn’t work).
I will add to the table in README.
This will be very useful for other people. Thanks!
*…
-
Hi All,
I’m using the diyless master thermostat shield with a wmos D1. And esphome 2023.12.9. Also did try with opentherm library 1.1.5 instead of 1.1.4. But same result.
It’s connect to a 2.4g…
-
I have a Genius Hub with an added OpenTherm Board (a beta trial they ran). That has added an extra zone for the boiler but without a type key returned from the api. I have emailed Genius Hub asking th…
-
I've tried all kind of things based on the readme and the issues reported earlier, but I can't get away from eavesdropping mode. I hope someone can help!
The log I receive whe starting up:
:~/sc…