-
Each Coral product has been tested with specific hardware and software versions.
\
These development systems must be connected to a host computer:
Product | Host Operating System
--------- …
-
### Environment
Second Life Release 7.1.10.10800445603 (64bit)
Release Notes
You are at 110.8, 116.2, 30.6 in WebRTC Voice 1 located at simhost-06c9a56af17a2102e.agni
SLURL: http://maps.second…
-
Hello, yesterday I put ryzen 3 3200g in my a320m-k and after driver instalation gpuz shows x1 1.1. I put rx 560(normal with outputs) and gpuz shows x8 3.0 is it normal? Before 3200g I used athlon 3000…
-
I tried to replace the wifi card of my lenovo chromebook 500e 2nd gen (Phaser360) wifi card with an nvme ssd but the system doesn't seem to detect anything on that port.
On the chrultrabook discord …
-
I have tested also this no-name card:
https://www.amazon.com/PCE2SAT-M01-PCI-2-Port-Expansion-Adapter/dp/B085LXSXDS
Card is accepted by custom kernel (compiled with SATA and Marvell support):
```…
-
**Describe the bug**
Hardware used:
• RPI5 8GB
• GeeekPi N04 M.2 NVMe to PCIe Adapter for Raspberry Pi 5 (https://www.amazon.com/dp/B0CRK4YB4C?psc=1&ref=ppx_yo2ov_dt_b_product_details)
• WD_BLACK …
-
I have a crucial ct250 m.2 250GB ssd used for system (c:), a Sandisk sx350 pcie 3200GB ssd for data (e:) and 2 hdd (b: & d:)
both ssd data are mixed together (see scrennshot), especially visible with…
-
As in the title. When I start shutting off the server, it skyrockets because when the docker container exists, it sets back the default enabled value for the third-party-card fan-reaction.. I would lo…
-
### 详细叙述
lede版本编译的r5s设备固件，两个LAN口其中一个LAN口无法识别，中间的2.5GLAN口无法识别，另外一个可以使用，查询使用的驱动是R8125驱动，什么原因呢？
### 重复 issue
- [X] 没有类似的 issue
### 具体型号
友善 r5s
### 详细日志
内核日志：
[ 0.000000] Booting …
-
**Describe the bug**
If I run an OpenGL application with an Nvidia card for acceleration, then the application will still be unaccelerated. This can also be seen using `glxinfo` which shows `llvmpipe…