-
Todo:
+) include SoftwareSerial to drivers
+) include espsoftwareserial to drivers
Changes in File MySensors.h
replace line 372 with
----
`#if defined(MY_RS485_SWSERIAL)
#if defined(ESP8266) …
-
### Description
I am using a ST3485 RS485 transceiver with the DE/RE pins shortened and connected to a GPIO pin.
Running as Modbus master, the request is received correctly by the slave but the re…
-
Hello,
In my case: Unipi G100 + M-Bus to RS485 converter + 9 x Qundis heat meters,
libmbus cannot find or read any device. Increasing time from default 300ms to min. 1100ms (baud: 2400) solves this …
-
192.168.1.224 - - [10/Sep/2019 19:14:26] "GET /setChlorine?pct=101 HTTP/1.1" 200 -
RS485 :
RS485 :
RS485 : 1002 00 01 0000 13 1003
RS485 : 1002 00 …
-
Hey there,
my setup is
SE-WND-3Y400-MB (Energy Meter)
|
SE3000H (Inverter with Display, ZigBee, Ethernet, 2x RS485 (2nd is unconnected), no SetApp, no RS232 that i can find on the PCB)
|
StoreEd…
-
### A clear and concise description of what the problem is.
I followed the instructions entirely including hardware. I keep getting the error above.
I have a tracer 4210an and already tried rever…
-
I have a pair of SE6000H-US000BNU4 that I am trying to connect to. Some other users have reported they successfully retrieved the keys from RS485 so I thought i would give it a shot. These are the new…
-
If using the USB-RS485-WE-1800-BT as suggested in the manual, it doesn't say which colours to use when connecting to the D+ and D- .
If you want to update the documentation its
D- yellow
D+ orang…
-
If an RS485 Output board is configured incorrectly or is not responding the system will periodically lag waiting for the board to timeout. It would be useful to detect a timeout and put the board into…
-
Hi & thank you for the project.
Does this support SRNE inverters & if not, do you have any plans to improve this to add SRNE inverter support?