-
Using latest build 4.3.9
Have rocking hotend and using Dondolo dual extruder Bowden . (Hotend 1 to the left, z probe in the middle and hotend 2 to The right).
Dondolo servo index is 1, the other "…
-
### Is your feature request related to a problem?
There's no Cura profile for Creality's latest and greatest?! i mean, what's going on with that?!
### Describe the solution you'd like
A cura profil…
-
### Description of the bug
When starting a print with TPU, the extruder leaves dots of filament on the bed because the nozzle temp is preset to the first layer for bed probing. I noticed in the recen…
-
Hi . I wired everything like shown up but get TMC Connection Error in Display. Checked via Pronter 3 TMC2008 get a Connection But the 4. Has bad Response All to low. Can sw Help pls . I used BT…
-
Just power off both heater and bed :(((
Two different (mirrored) pcs at the same heigh.
Hardware: DUE+RAMPS-FD+LV8729 (XY) 8825 (Z+E)
Repetier, Marlin 2.0 works well
`/**
* MK4duo Firm…
-
The default printer start gcode for the XL 5T has this line
```
M109 T{initial_tool} S{((filament_notes[initial_tool]=~/.*HT_MBL10.*/) ? (first_layer_temperature[initial_tool] - 10) : (filament_type…
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
I was able to attach my PandaPi to my Openbeam Kossel Pro, and all that's left is configuration. However, whenever I run G33, it consistently errors out with either "homing failed" (if I don't home fi…
-
All I want is to run Boiana_Eq code with DUE + Elechouse TFT shield for Due V2.1 + TFT_320QDT_ILI9341 - 320x240 screen.
Boiana_EQ code: https://drive.google.com/drive/folders/1no3Nnc6ZwLjqzFxb2D6PBbd…
-
I made a post in the main branch of [Marlin](https://github.com/MarlinFirmware/Marlin/issues/22996) & another user [here](https://github.com/bigtreetech/SKR-2/issues/96) has a similar issue.
What I…