-
Impacts all Sentinel-2 example notebooks.
Stack trace excerpt from EAIL_Water_WOFS_S2.ipynb
```
File /env/lib/python3.10/site-packages/datacube/storage/_base.py:95, in __init__()
92 mm = …
-
https://www.dropbox.com/scl/fi/dm0pgeh3ontm2ucyyx8ln/Hyundai-Elantra-2025-2024.zip?rlkey=a69l08vhv617201728xwdvj1b&st=oetvlokx&dl=1
-
The [NIfTI spec](https://nifti.nimh.nih.gov/nifti-1/documentation/nifti1fields/nifti1fields_pages/scl_slopeinter.html) says that the slope/intercept should be used _for nonzero slope_:
```
/ DATA SC…
-
Booting the GL-AR750, I can see that the gpio-based I2C controller is set up with the expected pins 16 and 17:
```
[ 0.147948] gpio-17 (sda): enforced open drain please flag it properly in DT/ACP…
-
I have succesfuly compiled and uploaded the SY6970 example (and added the `PMU.disableStatLed();` line to setup) but the green LED continues to flash, am I doing something wrong, or have I run into a …
-
As a COMPAS service user, this US purpose is to convert a given SCL file to another Edition.
As an integrator, I would like to be able to use a SCD from Compas software into old ICT software.
P…
-
It would be useful to me if I could provide an optional IED name in `findControlSubscription` to reduce the query scope.
I note in passing the current query is very broad
> https://github.com/O…
-
I used the lvgl_micropython project to update my esp32n16r8-ili9488-ft6x36. It originally had a usable LVGL MicroPython, but it's quite outdated (MicroPython 1.19). After compiling the firmware, I cou…
-
Hi，I found that some scan-connectivity json files are missing when I try to run your code.
Could you please provide them?
Thank you
-
While Heltec did not label any pins as SDA/SCL, it is still possible to use few unassigned GPIOs for I2C communication. I've just tested BME280 with GPIOs 4 and 5. Is any "official" choice of such pin…