-
The purpose of setting a timeout when using serialport scratch for serial communication is to prevent read operations from waiting indefinitely when no data arrives. If there is data, respond immediat…
-
I'm using the sample project but I cannot get serial monitoring in vscode to work. Any ideas?
I set monitor_speed in the platform.ini to match serial.begin(speed).
-
Olá, muito boa a idéia do projeto!
Estava querendo utilizar os dados da ups para controlar processos dentro um servidor que fica ligado a essa ups, pra encerrar processos que consomem recursos e a…
-
### What happened?
modbus rtu over serial port will not work correct because the serial may be not write all data to the pc(or memory?), due to this, if read serial port immediately after send comman…
-
## Why using /mnt/engineering as example?
The following section made me wonder.
> First, dont' forget to change the SELinux tag on the device (in the host) so that containers can use it:
> $ sudo…
-
About once per week I get the following exception causing the script to stop.
I suppose this is a system error (it did not happen on my first setup on a Raspberry Pi Zero. The current setup is Raspbe…
Phi2k updated
2 months ago
-
**Is your enhancement related to a problem? Please describe.**
SCSI virtio disks under windows server all display the same serial number and friendly name causes truble.
For example storage pool c…
-
Hi! great work here. for my project, i'm using the OBDLink SX as my OBD2 cable ( i'm pretty sure it does support ELM327 and work with same protocols) and i'm connecting it to USB host shield that is m…
-
`dmidecode -t system` has many missing fields; example:
```
# dmidecode 3.5
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0001, DMI type 1, 27 bytes
System Information
…
-
### Describe the bug
The distance sensor LIDAR Lightware SF45 Serial is not publishing to the distance_sensor uORB topic on fmu-v6x using a Pixhawk 6X on the Pixhawk RPI CM4 Baseboard.
First, I…