-
Hello,
i have a Shelly PRO 3EM and VenusOS 2.93 running on a Beaglebone Black. I have managed to install the GEN2 driver and configured the Shelly to send the values via websocket to the Beaglebone…
-
Hi there,
I followed your step-by-step guide until step 17. Where I picked "Shelly Plus Plug S" (which is the same as my device) and applied the configuration.
After that, the device rebooted bu…
-
Hi,
since the last Meross-Firmwareupdate for my MSS210 I get following error, when I try to turn on/off:
`"There was an Error: Error: socket hang up"`
It's still possible to get the status. Is t…
-
Will be support and will be added the new shelly plus?
-
Hi Alex,
I am using Shelly2.5 for roller shutter. More precisely it is an external blind (raffstore).
For the control of the roller I would expect that when I tap on the tile it starts to `close…
-
### The problem
This error is logged every 30 seconds at night when the inverter is offline:
````2024-07-07 04:16:00.520 ERROR (MainThread) [homeassistant.helpers.entity] Update for number.solar_max…
-
**Code:**
import ShellyPy
device = ShellyPy.Shelly("192.168.100.33")
deviceMeter = device.status() #request meter information
print(deviceMeter[0]) #print power information
print(device…
-
**Describe the problem you have/What new integration you would like**
When updating it would be nice to be able to select the devices you would like (tick box) to be updated and click a (one…
-
Hallo und danke erstmal für deinen ausführlichen Guide
Wollte fragen ob du denkst, dass es machbar wäre, auf den RPi Klipperscreen zu installieren und danach das Filesystem auf Read-Only zu stellen…
cptcl updated
5 months ago
-
I'm trying to flash a shelly plug s, which fails with "Aborting update: bad arch: esp8266".
### Device
Shelly PlusPlugS
### Original Firmware
1.3.3
### Firmware Url
http://rojer.me/…
fiedl updated
1 month ago