-
As @GabbyGenereux brought up, there is a possible risk of hitting the "eject hatch" plunger while lowering the intake arms.
Currently we need to know a couple more things before we can begin resol…
-
We should probably try to come up with a comprehensive and logical hierarchy of standard categories for both components and packages.
Those categories should probably be in the base library, so tha…
dbrgn updated
6 years ago
-
Hello,
I'm using a **Arduino nano** with **Grbl 1.1f** connected to a **OrangePi Zero** via **usb**.
I created a little test script in **python** that sends simple GRBL commands over **serial** to…
-
Hi all
I wanted to use two 4CH Pro to control centrally 4 rollos. In consequence I needed to split the interlock mode of a 4CH/pro into 2 groups of 2 channels, in order to prevent, that the up/down…
-
So I have wired limit switches into my X and Y axis. When I wire my limit switch, and then enable hard limits with $16=1, I cannot move my steppers. No matter what command I input, it will not execute…
-
When naving a really slow animation, like https://www.lunchboxsessions.com/materials/flow-directional-control-valves/solenoid-controlled-pilot-operated-directional-control-valve-with-pilot-chokes-simu…
-
I would like to control DC (computer) FANs by interfacing with the typical H bridge DC module based on HG7881 to drive either two DC motors or a stepper.
Fan max draw is 0.25A, so should be well in…
-
I have a project that has three I2C slave devices on a single bus (running at 100kHz). For some time I was developing with ESP-IDF 2.1.1 and everything was working pretty well, except for a weird prob…
-
The goal is to allow DRO-Matic to top off plants with it's dosed reservoir water X times between full water flushing of plants once every 7 - 14 days. This also allows the DRO-Matic to do full flushin…
-
Incorporate the ignitor system into the P&ID. (Kyle B) will be providing a schematic of the ignitor system and I will add it to the P&ID.
We will not be adding a wiring diagram since this will be de…