-
> **GUIDE**
>
> This troubleshooting issue template is meant to help Tasmota users with difficult problems. It is aimed to be opened if using the wiki and the support chat could not solve the issue.…
-
BH1750 is a digital Ambient Light Sensor IC for I2C bus interface.
I use this on an earlier version of Sonoff-MQTT-OTA-Arduino (1.0.11) to report to Node-Red (via a topic 'ILLUMINATION'), triggering…
-
I have looked for other similar posts, there are many similar problems, but I didn't find the solution.
And also if I have tried different ways to make work ptz I wasn't able to do it.
I tried in…
-
- Operating System: Windows 10 x64
- Python Version:
- Sonoff model: Sonoff Basic R2
- Sonoff firmware version: 3.5.0
- I have read the README, and understand that SonOTA does not work with the l…
-
### The problem
After upgrading ESPHome to version 2024.5.0, WiFi AP fallback (captive portal) is not working anymore. AP network is created and visible to any device that wants to connect, but it's …
-
I have a 4ch module
I screwed around in config and chose wrong module
The 4chan is talking on my mqtt bus
and i can reach it from http
But how to issue change to 4channel mode via http?
like, I…
-
### What happened?
Trying to pair a [TUYA TS0202_1](https://www.zigbee2mqtt.io/devices/TS0202_1.html#tuya-ts0202_1) resulted in the device immediatly leaving network after configuration and restart…
-
my accessory is in homekit but it does not respond in the application I think the error comes from the file json.conf
in the console tasmota the server mqtt works well
do you have an idea? thank you…
-
### What happened?
I can't change MQTT SERVER both on WebUI on in Configuration.yaml
I got an error on WebUI, and dosen't take effect when i change it into yaml file.
![Screenshot from 2024-01-15…
-
### Problem description
The device signature is not yet implemented in custom_quirks and all tries to add them failed.
### Solution description
Help to Adjust [_TZE200_2aaelwxk](https://githu…