-
I'm really keen on the project and would love to try it out as soon as possible. One thing that I'm struggling with, is the possibility to either use it with an existing esp32/esphome or somehow get a…
-
Hello, I detailed some information on the sparkfun forums:
https://forum.sparkfun.com/viewtopic.php?f=14&t=46875&p=196520#p196520
Basically, when I compile on a Teensy 3.5 I get nonsense values th…
-
I'm personally interested in both. Making and or using motherboards for modules (end users) and making modules (module maker for the lack of a better term).
Following pt's suggestion I making two i…
-
I am using Visual Studio Code 1.72.2 and PlatformIO 6.1.4. The board I am using is the Sparkfun ProMicro16 based on the 32u4. When compiling the example MIDIUSB_write.ino, I get the following warnings…
-
Hi Hendorog
Want to use the 6470, trying to find answers in your code, but on opening crashes
Do you have a fix?
Are you planning to further develop?
Can you send me the 6470 relevant code +pin assi…
-
Just noticed that there is no minimum resistor between the trim poti and the DELAY input, thus pushing the button will short Vcc to GND when the poti is set to an extreme position with 0 Ohm.
Also,…
-
This is an issue complained about in several comments across all of the 7 Segment product pages. Where everything appears normal, expect Segment 'E' on each digit does not display. I've verified the h…
-
Hi the datasheet for the SAMD21 here https://cdn.sparkfun.com/datasheets/Dev/Arduino/Boards/Atmel-42181-SAM-D21_Datasheet.pdf page 836, says that the ADDR value must be aligned with the two least sign…
-
@rwaldron, what do you and the rest of the j5 community think about separate modules for the various Edison boards - Arduino dev board, miniboard, Sparkfun board, and the new Seeed Xadow board?
I rece…
-
I was looking for a solution for controlling a fan cooling a repurposed Nvidia Tesla GPU (which are intended for specific server cases, depending on airflow being force fed into them), to control a re…