rwaldron galileo-io issues

rwaldron / galileo-io

Intel Galileo & Intel Edison IO Plugin for Johnny-Five

http://johnny-five.io

MIT License

101 stars 26 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Illegal arguments for construction of _exports_I2c

#60 ortizvinicius closed 7 years ago
0
optional i2c bus

#59 farfromrefug opened 7 years ago
0
access both i2c on minibreakout

#58 farfromrefug opened 7 years ago
0
Joule-io - Unknown Exception on "this.name = Pin.IO.getPlatformName();"

#57 virgilvox closed 8 years ago
14
JF + Intel Edison + Grove - Digital Light Sensor

#56 trifroggy opened 8 years ago
2
PingFirmata on the Edison

#55 WoodyWoodsta closed 8 years ago
4
PWM Pins Not Turning Off on Intel Edison when using led.blink()

#54 driewe opened 8 years ago
0
Add Support for Intel Joule

#53 virgilvox closed 8 years ago
5
Pin name undefined? (Issues regarding a fork)

#52 virgilvox opened 8 years ago
14
Fixes typo in the Intel Edison Arduino title

#51 diegopamio closed 8 years ago
1
Serial support

#50 dtex opened 8 years ago
0
Disable or give warnings on pin 7/ GPIO 48 on the Edison

#49 reconbot opened 8 years ago
0
detect the MRAA_VERSION env var to install mraa

#48 reconbot closed 8 years ago
2
Johnny five + Intel Edison + BMP180

#47 teuteuguy opened 8 years ago
23
One Wire support

#46 rwaldron opened 8 years ago
0
Use sample rate for i2c read interval

#45 rwaldron opened 8 years ago
0
Servo on DFRobot Edison shield

#44 Legendaire opened 8 years ago
8
Edison Mini Board has no connection at pin A

#43 Legendaire closed 8 years ago
9
Installing johnny-five, galileo-io

#42 freshfruit opened 9 years ago
1
Stepper: initial, functional support.

#41 MunteanuAndreiStefan opened 9 years ago
0
Can't seem to install galileo-io on latest edison image

#40 gwfong closed 9 years ago
3
fix(postinstall): Add a check & skip for Debian

#39 Awk34 closed 8 years ago
1
[question] Any chance of supporting debian?

#38 Awk34 closed 8 years ago
12
Added more info on failure for postinstall.js script

#37 ashishdatta closed 9 years ago
0
install failure with status 255

#36 jzheng-stoneriver closed 9 years ago
4
What do you think about separate IO plugins for the various Edison boards?

#35 codefoster opened 9 years ago
6
Trouble getting motor control to work with Pololu DRV8835 Arduino motor shield

#34 vrubiolo closed 9 years ago
10
Device or Firmware Error

#33 rubenmp8 opened 9 years ago
2
Restore correct pin name normalization for Arduino-based pin mapping. Fixes gh-28

#32 rwaldron closed 9 years ago
0
trouble to install galileo-IO

#31 alperpelik opened 9 years ago
6
Issue w/ setSamplingInterval in J5, galileo-io, node-red and node-red-contrib-gpio setup

#30 Jbossalini closed 9 years ago
3
Steppers not supported?

#29 rubenmp8 opened 9 years ago
10
Issue creating a new sensor on pin A0

#28 scazan closed 9 years ago
10
Devices undefined, REPL initiated error on Intel Edison

#27 rexstjohn closed 9 years ago
14
new Pin.IO.Gpio(1, undefined); avoid seg fault

#26 rwaldron closed 9 years ago
0
Update readme.md with note regarding Edison require sequence.

#25 mpbod closed 9 years ago
0
new io.Gpio(this.addr) fails - again, but I found out something interesting

#24 Injac closed 9 years ago
26
Cannot call method 'getPlatformType' of undefined

#23 adricadar closed 9 years ago
4
Possible Issue with I2C?

#22 ashishdatta closed 9 years ago
5
Ensure 0.8.x support for certain Intel sponsored programs

#21 rwaldron closed 10 years ago
0
new io.Gpio(this.addr) fails

#20 andrewfaria closed 10 years ago
13
Implement setSamplingInterval

#19 rwaldron closed 9 years ago
0
galileo-io is maxing out the CPU

#18 adampasz closed 10 years ago
8
analogRead throws error on Gen 2

#17 ryoshu closed 10 years ago
6
Digital write not working on PWM pins, Gen 2

#16 ryoshu closed 10 years ago
80
Please provide examples of using node-red with galileo-io

#15 js333031 opened 10 years ago
0
Beginner Feedback

#14 garrows closed 9 years ago
10
fs: missing callback Error: ENODEV, write

#13 qwertypants closed 10 years ago
1
"exit" process isn't triggered

#12 qwertypants closed 10 years ago
7
Replace open + writeFile with appendFile

#11 rwaldron closed 10 years ago
0