-
Hi!
Just tried to flash a Manta M8P (V2.0) with Katapult / Klipper. It uses a STM32H723 controller.
Compiling and flashing Katapult was no big deal. And since I enabled the Status LED I can see…
-
The Data Cache for Cortex-M7 devices is currently disables, due to a lack of in-depth understanding of cache policies during porting. The Instruction Cache however is enabled, since it only gets read.…
-
Hi!
I did a lot of testing and it seems the code doesn't work on STM32L boards with Arduino.
I get everything up and running using an Arduino Nano, so both the SD and the connections are fine. I…
-
USB3 Super Speed implement USB CDC with an example (will need to update the https://github.com/hydrausb3/wch-ch56x-bsp)
- To be checked on the feasibility and performance with compliance with CDC/A…
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
**Is your feature request/improvement related to a problem? Please describe.**
yes
**Describe the solution you'd like**
Being able to install stm32duino in Arduino on Raspberry Pi.
**Describe …
-
**Describe the bug**
If I build the blinky sample for nucleo_h723zg using stm32cubeprogrammer runner, and then I connect a J-Link to flash it again through the MIPI10 connector: west flash fails.
…
-
## Introduction
Currently, only one API can be mapped to each instance of a struct device. This proposal provides two solutions which together allow for multiple APIs pr device instance, and the cr…
-
There's an ongoing work which goal is to add support for (all) [ST Nucleo boards](http://www.st.com/en/evaluation-tools/stm32-mcu-nucleo.html) to RIOT.
The goal of this issue is to keep track of th…
-
**PROBLEM**
Program execution takes more time in zephyr 3.6.0 on stm32-h743 controller
**Elaboration:**
Same program execution takes more time in zephyr 3.6.0 when compared with zephyr 3.2.0 on s…