-
We need the packet forwarder to be compatible with x86_64 so that we can start the FCC certification
Explore multi architecture containers
**Acceptance criteria**
- 5g miner added to Balena fle…
-
#### Summary
Once #497 is merged, lets add more common devices from https://www.semtech.com/products/wireless-rf/lora-core and the LR1110 in the same format.
#### Why do we need this ?
…
-
I've got the RAK 2287 USB module here which is plugged into a Raspberry Pi 4B (4 MB RAM) on the latest Raspberry Pi OS.
I've tested the standard ARMHF as well as the ARM64 release (fresh installs).
…
-
According to Semtech **"the low data rate optimization is usually recommended when a LoRa® symbol time is equal or above 16.38ms" (SX1261-2 Datasheet Rev. 1.2 06/2019, page 39 num. 6.1.1.4**
Your `…
-
Hi, I searching for alternative library to https://github.com/sandeepmistry/arduino-LoRa
Is there some Channel Activity Detection or something to tell my if is channel free?
Is supported SamD21?
…
-
I have a [TTGO TBeamV1.1](https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/schematic/LilyGo_TBeam_V1.1.pdf) which I have successfully programmed for low power usage. 0.82mA in deep sle…
beele updated
2 years ago
-
I am connecting a [eByte E22-900M22](http://www.ebyte.com/en/product-view-news.aspx?id=437) module with the SX1262 chip. This module has DIO1 and DIO2 exposed, but DIO2 (in my setup) is used to contro…
-
Sx1302 / sx1303 not working with current packet forwarder. Need to investigate why
-
Hi,
I am using WL55JC1 board with STM32CubeIDE. (SF=7 and BW=125)
I have modified the code from Applications/SubGHz_Phy/SubGHz_Phy_PingPong for LoRa-to-LoRa transmission.
On the receiver end, I…
-
HI,
I'm trying to trim crystal oscillator frequency, and read Application Note: Crystal Oscillator Trimming(AN1200.33). But just after function `Radio.SetTxContinuousWave( RF_FREQUENCY, TX_OUTPUT_P…