-
First off; thank you @eyalcha for sharing this great platform!
However, I can't seem to get the Home Assistant integration working. The WEMOS works, the sensor works, however after adding the cust…
SamKr updated
4 years ago
-
hi @jelle737
hope you are doing well.
I'm trying to open an image using your code but I couldn't it's not the same camera you mention
the camera I'm using is xcore micro 3 lite and the error I'm f…
-
Hi I want to improve my yolo detections with ir camera feed. Now we are using the standard yolo3.weights file and obviously is not as good as with a visible camera.
I know about this https://www.fl…
-
Hi there,
I tested my Lepton Flir 3.5mm with the soft get Thermal and I cannot reach the dynamic range that was advertised by the manufacturer.
Indeed, this camera should be able to detect temper…
-
I'm using MotionEyeOS version 20180224 on a Raspberry Pi 3 board, with an ELP brand USB camera model ELP-USB30W04MT-ML36.
I have a script _monitor_1_ located in /data/etc that contains the followin…
-
Seek Thermal Compact Pro apparently isn't supported.
# Hardware and environment
Intel NUC
Thermal Compact PRO plugged into USB 3.0 port
Ubuntu 14.04
# Current situation
## lsusb output
`…
-
Hello!
Getting an error attempting to upload recordings from sidekick that were gathered from a Cacophony thermal camera.
- Version 2.0.0
- Samsung Note 9
- The group and device were successfu…
adbs1 updated
3 years ago
-
QGC daily for Android.
I brought this up half a year ago, now it's too annoying to be ignored.
Then, I reported in on Note4 (and Note 10.1 2014)
Now I have a new Note 8 - and same issues right after…
AndKe updated
4 years ago
-
Hi,
I'm trying to calibrate a thermal camera with a Velodyne VPL 16. While running the coarse calibration I'm getting the following error:
[pcl::SampleConsensusModel::getSamples] Can not select …
-
I am using Raspberry Pi 4 and HTPA32x32d thermal camera sensor. I am using https://github.com/cjcbusatto/thermografree this fork for reading the camera with I2C.
I use this sensor in my project And…