-
When I set `QUICK_HOME` it will run BUT it crashes into the stops.
If I home each axis individually the endstops work fine.
I think I had one config that worked but I can't find it.
This is a CoreXY s…
ruggb updated
2 years ago
-
Hi - Still working on getting the BugFix version to work. Downloaded a new RCBugFix branch today and am getting an issue with the ABL functionality. The probing starts in the center (X0 Y0) and moves…
-
```
The Marlin version RC7 - 31 Jul 2016
Machine Self build coreXY
Electronics board ramps 1.4 with arduino 2560
Machine components (direct drive e3d lite, with termistors (my stepper drivers are m542…
-
Hello, i'm having An issue when i upload Marlin 2 to my Skr2.0 revB with 2209 stepper drivers. Printer is a tronxy x5s corexy model. I can move all Axis, however X and Y only move diagonally. Corexy …
-
with the new version of jyers the nozzle temps extremely fluctuating between 190 -210 by an setted tem of 200.
i have done a pid tunnig , its done ok but after saving the fluctuating nozzle temp also…
-
_From @Roxy-3DPrintBoard on March 30, 2016 19:59_
The Atmel ATSAM3x8e on the Due board is definitely viable. It has the benefit it can plug into the RAMPS or RADDS base board and at that point it i…
-
Error compiling in Marlin 2.0.6.1 from the latest commit from BTT's github firmware /bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4/Firmware/Marlin-2.0.x-SKR-V1.4-Turbo
**My questio…
-
Hi, my setup is almst done (missing frame pieces), but i can adapt the ectronics to the machine
what is the minimun requirements (inputs/outputs) for this project?, (a Fysetc AIOII https://github.c…
-
I've been working on building a board for a Raspberry Pi that contains:
- an electrically isolated RS-232 interface
- 3 thermocouple interfaces for measuring temperatures inside the generator
- o…
-
Hi,
i am runnng a skr pro v 1.1
tft 35 v2
tmc2209, uart mode, sensorless homing
marlin 2.0.x, latest release
While trying to change TEMP_SENSOR_0 from 1 to -5 (which indicates i am using a max a…