-
I'm using this lib on a digispark pro with oled against 4 x tmc2209s in a grbl machine. It's completely parallel to the grbl controller.
I'm enabling all of the advanced tmc features: hybrid stealth/…
-
I have a bunch of Creality 4.2.2 stm32f103ret6 boards from upgrading ender 3v2's I'm sure I'm not alone, was wondering if its possible to get grblhal on them they seem similar to the blue pill. I foun…
-
#### Description
After upgrading the console would lock up after connecting; unlock command and then it seemed to hang. Power cycled controller and downgrade to 1.9 = fixed.
Rolling back to 1.9…
-
Hi,
Really like this project.
Do you think it would be feasible to support a wider range of voltages, up to 48V or 60V for use with large machines and motors?
-
everything seems to be running fine, but i've noticed that the 2nd motor socket (y-axis) seems run unusually warm. even when just powered on and not used it seems to 5-10 degrees warmer. intuitively…
-
TMC2226 is configured to #define X_RSENSE 0.11 or #define X_RSENSE 0.15 ? is there any more change? Thank you
-
I'm trying to run a Nanotec motor through the ros2_canopen stack.
Following the documentation and trinamic [tutorial](https://ros-industrial.github.io/ros2_canopen/manual/humble/application/trinamic…
-
Hi,
i'm using RADDS on a original Arduino Due with 5 TMC2130 Steppers from Watterot (the original ones für 3,3-5v) connected on X,Y,Z, E1 and E0. E1 is for the Second Motor of my Z-Axis.
I'm not…
-
Hi
I'm having issues with the SKR Pico Board where the steppers run very slowly. I'm using 1/8th micro-stepping with a 1.5mm lead screw pitch and 1066 steps/mm. This works fine on my foam cutter usi…
-
The purpose of this issue is to put info on this problem in one place for easy reference.
### What is the problem?
As has been discussed in several issues in this repository and others, there is…