-
Hi all!
As I've taken my notes in English (and everything is becoming quite technical), I am adding his as an issue to github, not the the OBS forum:
We are currently trying to build some OBS **…
-
I tried to setup the gnss (u-blox) and compass (lsm303dlhc) mod on top the main branch. But Arduino IDE could not compile because few include files are missing e.g. runningAngle.h RunningAverage.h etc…
-
I think it would be useful to have some simple callbacks for cellular connections that respond to changes in signal strength, using straightforward categories like Good, Fair, Weak, and Poor. From wha…
-
### Category
Hardware Compatibility
### Hardware
Raspberry Pi Pico (W)
### Firmware Version
2.3.7.30fbcab
### Description
The Pico W works just fine with GPS, but the firmware doesn't allow it …
-
1. Stratux version: 1.5b2
2. Stratux config:
SDR
- [ ] single
- [X ] dual
GPS
- [X ] yes
- [ ] no
type: Stratux GPYes 2.0 u-blox 8 GPS unit
A…
-
1. Stratux version: latest stable release (Stratux Europe Edition 1.6r1-eu022)
2. Stratux config:
SDR
- [ ] single
- [X] dual
GPS
- [X] yes
- [ ] no
t…
-
Hi! Thanks for the great crate!
I'm working off of the u-blox 7 Protocol Specification V14 document.
The payload length of the NavPosVelTime should be 84 bytes according to this spec. See NAV-P…
-
What would be the best for 10 cm accuracy ?
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
ublox GPS reports…
-
I'm using 2 different f9p kits. The C099 evel kit and the new EVK eval kit. Both from ublox.
The C099 works flawless!
However the EVK throws the following error (with the exact same working config):…