-
**What kind of new feature are you looking for?**
- Hardware: Support for CH347 based hosts such as https://www.waveshare.com/wiki/USB_TO_UART/I2C/SPI/JTAG
- Software: Windows mostly but could check…
-
Hardware: esp32 dev kit
Compiler: Arduino IDE 2.2.1
The acm_terminal example doesn't run together with the TFT_eSPI library.
If added some software lines to the example, to test the HostShiel…
-
Hi, and thanks for sharing your work !
I was gifted a [Chinese copy of the EleksTube](https://www.ipstube.com/en/product/IPStube-401.html), and decided to see if I could reverse-engineer it. Doing …
-
### Board
ESP32-S3-Mini-1
### Device Description
S3 connects to USB directly. NAND/SD memory connected over SPI. Wiring guide at https://github.com/frankcohen/ReflectionsOS/blob/main/Devices/Hoober…
-
See two versions below (either is fine for production - depending on chip availability for the U202 part:
## v1.1
This uses the TPS62242DRV in U202.
You will see there are 4 types of BOM:
86…
-
When I try to use Usb library I get "Please define board in avrpins.h" and "No SPI entry in usbhost.h" errors in order. I expect it to work directly with the sample code. Does arduino uno r4 wifi supp…
-
This week, I did some tests on my ESP32-S3 (ESP32-S3R2) corne/corneish clone with the ZMK firmware.
- 16M SPI FLASH
- 2M Internal PRAM
The positive outcome is that the ESP32-S3 SoC can run ZMK …
-
### The problem
i have tried a lot of different ways but none of them work on windows and on a raspberry pi
- via https://web.esphome.io/ able to install and configure wifi but no logs or device…
-
Hello! hoping someone can help me with this.
I am attempting to program one of these boards https://www.ebay.com.au/itm/CSR8635-Wireless-Stereo-Bluetooth-4-0-Audio-Receiver-Board-USB-Amplifier-Mod…
-
### Related area
USB Mass Storage Device
### Hardware specification
ESP32-S3 DevKitC-1
### Is your feature request related to a problem?
The examples are based on the SPI SD card interface. Is it…