-
```
cpu fan (fan #1) is not reported at all (0 rpm) or it reports it only after i
run the A-tuning (fan-tastic) utility of Asrock M/B and even then it toggles
between 0rpm and ~1060rpm all the time …
-
```
cpu fan (fan #1) is not reported at all (0 rpm) or it reports it only after i
run the A-tuning (fan-tastic) utility of Asrock M/B and even then it toggles
between 0rpm and ~1060rpm all the time …
-
```
cpu fan (fan #1) is not reported at all (0 rpm) or it reports it only after i
run the A-tuning (fan-tastic) utility of Asrock M/B and even then it toggles
between 0rpm and ~1060rpm all the time …
-
```
cpu fan (fan #1) is not reported at all (0 rpm) or it reports it only after i
run the A-tuning (fan-tastic) utility of Asrock M/B and even then it toggles
between 0rpm and ~1060rpm all the time …
-
hi, i want to make a portable variable power supply controlled by esp32
i want to ask some question about the module
1. is the module synchronus aka there is 4 mosfet operating the inductor in full …
-
I use external signals to control the pq_input of PQLoad with the initial p/q as zero. When the p/q increses the voltage of the generator will increase suddenly and the simulation stops.
![Snipaste_2…
-
Hello,
We are trying to make a similar library. We may opt to abandon our efforts and join this project instead, since a Google-backed repo will undoubtedly gain more traction. However, it is str…
-
Hi Support folks --
I'd like to run SUPPORT on small patches of a voltage imaging video (say 10 pixels x 10 pixels x Time). Is it possible to do this? It seems like with the pretrained models they …
-
Servo motor drivers stripped out and Quadrature encoders wired directly into beaglebone, which has a new circuit board on it.
Machinekit and G-codes no longer the way forward.
This enables experim…
-
```
cpu fan (fan #1) is not reported at all (0 rpm) or it reports it only after i
run the A-tuning (fan-tastic) utility of Asrock M/B and even then it toggles
between 0rpm and ~1060rpm all the time …