-
**The problem/use-case that the feature addresses**
Sometimes I would like to see which slot a key should belong to without actually adding it. So I think such a feature would be helpful.
I am s…
-
Hello, good morning, I can't update Gateway 3 with firmware for Zigbee2MQTT, it doesn't give any error, but it doesn't continue, I attach a screenshot.
Is it better to use this firmware to use Zigbee…
-
-
http://kozos.jp/books/makeos/
https://www.amazon.co.jp/dp/4877832394
500ページ
目 次
第1部 ブート・ローダーの作成
1stステップ●開発環境の作成(p.003)
1.1 開発環境の構築
1.2 「Hello World」のソース・コード
1.3 「Hello World」を動かしてみよう！
1.4…
-
Would probably be a good idea to focus on the dfu loading rather than the old serial bootloader. Most people will be getting their boards from crowdsupply which comes preloaded...
-
Hello,
I try to update firmware of my Elelabs adapter.
I get this stack :
```cmd
root@jeedup:/opt/elelabs/elelabs-zigbee-ezsp-utility# python3 Elelabs_EzspFwUtility.py flash -f firmware/efr32mg1…
-
BLE Name: DSJM
Service UUID: 0000fe00-0000-1000-8000-00805f9b34fb
Tx Characteristic UUID: 0000fe01-0000-1000-8000-00805f9b34fb
Rx Characteristic UUID: 0000fe02-0000-1000-8000-00805f9b34fb
Initia…
-
```
drasko@Lenin:~/rtl8710/RTL00MP3$ make
make[1]: Entering directory '/home/drasko/rtl8710/RTL00MP3'
===========================================================
Compile (build)
=================…
-
A Calendar without the size overload from java.util.Calendar could be useful to work with time series from sensors. I did one similar to DateManagement, i.e. using only a long integer and an (static) …
-
Hello,
Thanks for your works .
I have a reolink RLN8-410(hardware version:N2MB02 or H3MB18)
It does not start up successfully after powering up
I can putty to nvr,and this below is the output…