-
Provide a way to install homebrew packages through to UI
-
Spotted a probable copy/paste error while reading through https://github.com/simplefoc/Arduino-FOC/tree/master/src/current_sense/hardware_specific/stm32/stm32g4/stm32g4_utils.cpp
Line 208, shouldn't …
-
Hello all,
It seems Remill cannot lift the `adcs` instruction in ARMv8.
I tested HEX code `0e020cba` : https://armconverter.com/?disasm&code=0e020cba&offset=400544
I attach the bash command that …
-
Study the ADC channels of KL25z and its possible to send and receive data simultaneously.
-
Viz issue GEODOSu https://github.com/UniversalScientificTechnologies/GEODOS01/issues/23
Přidání vhodně konstruovaného ADC do tohoto modulu by zároveň také umožnilo, aby v celém zařízení nebyl potře…
-
This application is quite good. Im wrapping your ldparser to get some variables of interest. As you have mentioned in previous issues, you dont need a temporal reference to synchronize the data, but j…
-
This is a very nice project. I am going to build and use.
I have a breadboard up and running the code with one problem.
I am using the ESP32 D1 mini board (with limited GPIO)
The analog port …
-
```
adc_get_value_mv had a hardcoded value , replaced it for the correct variable
```
Original issue reported on code.google.com by `weimara...@gmail.com` on 17 Jun 2011 at 7:49
Attachments:
- [adc.…
-
Model: 4.7-S3 , V2.3
[ 16458][E][esp32-hal-adc.c:158] __analogRead(): Pin 36 is not ADC pin!
This comes on serial when it tries to read the battery voltage
The board would only work when conn…
-
I'm trying to run the command: `terraform -chdir=terraform apply -auto-approve` and the following error is occurring:
```
│ Error: Error creating InspectTemplate: googleapi: Error 403: Your applic…