-
Does anyone know if this library works with the color effects strands that are available today. It doesn't seem like the g35 sets are still available
https://www.amazon.com/GE-50-Count-32-67-ft-Mul…
-
I am using FastLED.show() to update WS2812B leds. I am looking to have my control over the moment the leds update to the new state be as precise as possible.
My understanding is that FastLED.show()…
-
Hello Awawa!
First of all I'd like to thank you for all the work you've put into this project, which is quite simply the most accomplished on the ambilight scene!
I'm back from the early days of amb…
-
Just looked over the schematic of rev D
To achieve lowest Vbat and OFF current pls consider following changes:
1) Make the VDIV divider same as in the nrf52832 board (high ohmic + add capacitor!)…
-
Pi Zero 2 W with Keyestudio 5V ReSpeaker 2-Mic Pi HAT V1.0
Seems to crash in listening mode. But I cant see any errors from
journalctl -u enhanced-wyoming-satellite.service
I actually cant…
-
I was playing with rgbw leds, using the existing `ws2812` driver. It turned out to be quite easy, instead of writing the GRB bytes, I needed to write a 4th W byte. So, what might support for this loo…
-
**Is your feature request related to a problem? Please describe.**
The HD108 is a relatively new 16-bit two-wire chipset supporting very fast data rates (40 MHz) and PWM rates (27 kHz). It has a simi…
-
Was wondering if
```
FastLED.showColor(CRGB::Green);
FastLED.show();
```
would be equivalent to
```
fill_solid(leds, NUM_LEDS, CRGB::Green);
FastLED.show();
```
The `fill_solid` works as exp…
-
I am unable to get this sketch to work due to `Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.` Currently I have the panel connected as outlined in the MatrixHardwa…
-
hello,
I use a neopixel stick and a raspberry pi 4, and I meet a problem with the SPI (gpio 10).
my script displays all the led in red, but a call on two of the script sends the leds in white (lumin…