-
Arduino nano ESP32 has ESP32-S3 chip, so it seems like it should be supported, but I get the following error, looks like the library doesn't know what board it is:
```
In file included from /Users…
dderg updated
11 months ago
-
Not sure if this issue is platformIO-specific, or also occurs in ArduinoIDE...
It is found by forum user dikafoc, and described here: https://community.simplefoc.com/t/b-g431b-esc1-beginner-guide-i…
-
I have a confusing issue I'm trying to track down involving the timers on Renesas. This is for a motor control library, and I'm trying to initialise the timers on the MCU in very specific ways.
Ren…
-
I'm wondering why it's possible to do FOC without sampling phase current.
cvabc updated
9 months ago
-
In our controlller we need to temporary stop the RP2040ADCEngine, so we can use RP2040 flash memory access for saving parameters in the user interface.
The RP2040ADCEngine stop function hangs in 'd…
-
Using the Ardiuno IDE 2 with latest SimpleFOC library and latest[ Arduino-Pico core](https://github.com/earlephilhower/arduino-pico), with my [RP2040 based board](https://oshwlab.com/nekosystems/bl204…
-
### Board
ESP32S3
### Device Description
Board drawn by myself using ESP32S3 FN8 chip
### Hardware Configuration
InlineCurrentSense current_sense = InlineCurrentSense((float)0.01, (float)20, (int…
-
### Variant
USART
### Control type
FOC
### Control mode
Voltage
### What is the bug and how to reproduce it ?
I made a go kart a few years ago using this firmware, I control it using an Arduino…
farev updated
11 months ago
-
**Is your feature request related to this issue? Please describe. **
How to add support for new sensors?
**Describe your desired solution**
I don't know how to add TLE5012B MagneticSensor.
-
Part 2 of this issue, continued from here: https://github.com/arduino/ArduinoCore-renesas/issues/139
Please lets keep it to the relevant parts for the issue, and have any conversation around it her…