-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
Add new board definitions based on [this gist](https://gist.github.com/ah01/762576)
```c++
#if defined(__AVR_ATmega168__)
// Arduino Diecimila and older
LINE("__AVR_ATmega168__", __AVR…
-
This was discovered during code review and has not yet been seen in production. If possible, try the following combinations:
Expected faulty PGMs:
- jtagice3_tpi, pickit4_tpi, xplainedmini_tpi…
-
~~I don't own an [STK600 board](https://www.microchip.com/en-us/development-tool/ATSTK600), so I can't confirm this.
But from the looks of it, the STK600 can only be used in ISP, HVPP or HVSP mode w…
-
When I ran setup.py it said MCUs 0 and there is only one MCU to choose from when starting an new project.
-
Most of the ATmega/ATtiny symbols end their descriptions and use footprints starting with "QFN-xx" where they should perhaps be more specific, eg. "VQFN". The problem: Atmel could not seem to decide w…
-
Thank you for developing this useful library. I have been relying on it, particularly for projects involving the ATtiny10. While I was little disappointed to see support for the ATtiny10 dropped in v2…
-
Hello there, many thanks for writing this library, it works very well on the wav sample you provide: https://github.com/cytecbg/android-fskmodem/blob/master/examples/FSKModemDecodeWav/assets/fsk.wav
…