-
This is #4 continued.
It seems all message types are not going though this plugin code.
This document helps a lot to understand how it works internally.
https://github.com/merbanan/rtl_433_test…
-
Hey all,
I am planning to get [one of these](https://www.banggood.com/DIGOO-DG-PS01-Smart-Power-Strip-Work-with-Alexa-Smart-Home-USB-Port-Remote-Control-Power-Outlet-p-1287111.html), but before I hit…
tlc76 updated
4 years ago
-
Hi!
I wast testing an brand new Digoo NX-SP202 dual socket but it did not connect to fake AP.
After some sniffing, I found out my socket is trying to connect to "tuya_mdev_test2".
Then I ch…
alfem updated
4 years ago
-
The automatic nightvision function doesn't seem to work, it never switches over from normal to IR.
If I can change the sensitivity of the automatic function or just set it to switch to IR at certai…
-
Hi,
I successfully compiled and used the code (with the Digoo plugin) and an Arduino Nano board.
Then I tried to move the code to a ESP8266 board ("amica", from a generic supplier), and after ad…
-
I have sensors Digoo DG-R8B (Nexus-T) and Digoo DG-R8H (Nexus-TH).
Digoo DG-R8B not read humidity.
Digoo DG-R8H work fine.
Using another way https://github.com/aquaticus/nexus433 they are both re…
-
I have a problem with the connection of a IP-cam via rtsp protocol.
The connection with VLC with
rtsp://192.168.x.x:554/onvif1
works fine.
When I use the same address in motion I become the followin…
-
### PROBLEM DESCRIPTION
In Tasmota the H801 controller flahes LEDS attached, briefly at full brilliance on powerup.
### REQUESTED INFORMATION
_Make sure your have performed every step and c…
-
I'm hereby reporting another device that can not be OTA-flashed anymore after the newest Tuya update.
Device: Teckin SP22
WIFI Firmware v1.0.7
MCU Firmware v1.0.7
Tuya-convert is running on a …
-
I have an RFM69 dev board and some ESP8266 modules (NodeMCU) and I'd like to try write some code to using it with OpenMQTTGateway to receive weather station packets and send onward to HomeAssistant (…