-
Have you seen this?
https://www.youtube.com/watch?v=4I8ohXMIhjs
And would a custom ESP32 S2 board with as much PSRAM as possible help with the frame rate and the encoding needed for HomeKit (Sec…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
I'm tryng to use ES32-S2 as usb host device to read a flash drive, but alway get de error below:
14:45:32.663 -> ESP-ROM:esp32s2-rc4-20191025
14:45:32.663 -> Build:Oct 25 2019
14:45:32.663 -> rst:0…
-
I would like to use WPA3 with my FeatherS2. This should probably be an optional feature since WPA3 uses more resources than WPA2. What do you guys think?
https://github.com/caiokat/circuitpython/co…
-
### Board
ESP32-S2 based
### Device Description
Multiple I2C devices
### Hardware Configuration
GPIO 11 & 12 connected to I2C
### Version
latest master (checkout manually)
### IDE Name
1.8.19…
-
How can I enable AT commands on ESP32-S2-KALUGA1 debug via UART1 port of ESP32-S2 ?
I am trying to install :
CONFIG_AT_UART_PORT_TX_PIN_DEFAULT 43
CONFIG_AT_UART_PORT_RX_PIN_DEFAULT 44
so tha…
edbek updated
3 years ago
-
### Wiki Search Terms
- esp32-s2
- esp32-s2 ipc
### Controller Board
![image](https://github.com/bdring/FluidNC/assets/41329948/2a66bf0d-06aa-4489-aaa8-2230665de86a)
![image](https://github.com…
-
Understanding if module type->architecture took some time to get sorted. https://docs.esp-rs.org/book/installation/index.html
A table of typical modules (name -> family -> architecture) is a good …
-
I am using the latest version of this library with arduino core that is from idf-release/v4.4 branch. the esp-idf is 4.4.7
I have followed the instructions from the https://github.com/Bodmer/TFT_eS…
-
### What happened?
When I am using ESP32 as my platform and simultaneously connecting the fourth Xboxone controller, the program crashes as shown below. And when connecting to the third handle, it sh…