-
Hello, Hope yall have a nice a day
i`ve followed the steps to build for my esp32-wroom and builded successfully and i uploaded the hex on my esp which went successfull as well I run:
ros2 run micro_…
-
Hi,
I started investigation on how I can connect USB serial device (9600 bps) no more.
Do you think this is possible with USB soft implementation (I realize it shall be enhanced/implemented).
T…
-
ESPLoader is initialized by calling `main_fn`. This function calls `detect_chip`, which in turn calls `connect` which triggers the connection sequence.
If a device requires the BOOT mode to be held…
-
Hello my friend
I have a project that i use pms5003
Also i use gps,mq131,mq7 and LED 64*128
I CONNECT VCC of pms5003 wire to 5v esp3 and connect gnd to gnd
Then connect rx and tx of pms to tx an…
-
### Answers checklist.
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [X] I have used…
-
> Please provide a clear and concise description of the bug along with logs
## What are the steps to reproduce this issue?
1. Use VSCode & MicroPico on Win 11 connected to an ESP32 w/ micropython …
-
Im currently Testing this in on my old but trusted bmw r1200gs from 2004. I'm printing the readings via the Logstream function. Its looks like its reading the injector fine. When i give gas the L/h st…
-
### BlueRetro firmware version
v24.04_hw1
### BlueRetro firmware specification
HW1
### BlueRetro firmware variant
System specific
### BlueRetro hardware type
Internal install DIY
### Manufactu…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
with passthru from DFU,
setting io12 on (this pin is used with SD card) reboots ESP32
passthru somehow connects rising io12 pin with EN,
disabling driving EN from passthru doesn't reboot anymore o…
emard updated
2 years ago