-
I failed to build the firmware downloaded from here after i upgrad PlatformIO to the latest version (Core 6.1.3).
It seems that the build-in library of ESP32 cannot be read correctly.
Please help.…
-
I am experiencing slow file upload via the web interface – around 64 kB/s. Any way to increase the speed ?
-
**Is your feature request related to a problem? Please describe.**
Using Platform IO, there are only a few options, ESP32 dev, ESP8266..etc but there should be esp32cam
Just like in Beta 3.0x
Why…
-
Can the Marlin FW please be updated.
I find eeprom saves are forgotten.
Z axis offset keeps changing as well.
bad BLtouch functionality.
I fi can install an alternative FW its fine as well.
Than…
-
I think it would be very informative to bench the speed of upload / download a file using FTP / WebDav / Webserver
to LocalFS / SD on ESP32 and ESP8266
using MCVE to be sure the comparaison is corr…
-
Por favor, me es necesario trabajar enviando los gcode vía WiFi a la impresora, por eso uso lvgl_ui, pero esta muy limitado este perfil respecto al colour_ui. Por eso pido, ruego más bien, que por fav…
-
What version of the firmware are you using?
[VER:1.3a.20210306:]
[OPT:PHSW]
Is the problem repeatable?
Yes - albeit sporadic
Under what conditions does the bug occur?
Running job off …
-
TMC2130 support for Marlin 2.0 bugsfix has been successfully compiled to run with ESP32. A native ESP32 pin needs to be used for the CS pin, for example, GPIO21 (SDA) or GPIO22 (SCL).
TMC2208 and T…
-
@terjeio, as you mentioned in your reply
https://github.com/terjeio/ioSender/issues/216#issuecomment-1257055165
**PI Pico W** is now supported by grblhal and your RP2040 driver - great !
But act…
-
Had previously a Wemos D1 mini pro with 16mb flash and everything was working fine (using the spiffs) but as i use that board for other projects i ordered a Wemos D1 mini v3 and a SD card shield for i…