-
# Programming the Wemos S2 Mini with Tasmota: An Easy Guide for ESP32-S2 Devices | Dialedin
Get the most out of your Wemos S2 mini by programming it with Tasmota. This ESP32-S2 based device features …
-
### Board
ESP32-S3-WROOM-1-N16R8
### Device Description
Plain module ESP32-S3-WROOM-1-N16R8 in a custom PCB.
### Hardware Configuration
GPIO 19 and 20 are connected to a host USB (PC or…
-
There have been many comments and posts relating to `OSError: Camera Init Failed` error when trying to initialize the camera. I have reviewed every post, which the most recent was over a half a year a…
-
Hi,
I'm unable to flash mi device. Here is the result:
```
esptool.js
Serial port WebSerial VendorID 0x303a ProductID 0x80c2
Connecting..........Error: Invalid custom reset sequence
```
-
[esp-flasher-stub](https://github.com/esp-rs/esp-flasher-stub) project is dual-licensed licensed under MIT and Apache 2.0. Using the stubs from that project can help remove the dependency on the GPL-l…
-
Current README.md has teh following CLI example for flashing M5Cloud:
`esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART write_flash -z 0x1000 firmware.bin`
Flashing suceeds with this, but th…
-
I have a Zigate_ethernet with firmware version 1.5c on it.
After flashing the device with version 1.6 of the firmware, the device is not working anymore. I used the esptool exactly as described in th…
-
I can't install the latest firmware on the station. I open 'firmware update' window and try both options mentioned below:
1. automatic update via direct download from github - it says that update has…
-
Hello,
I'm trying to use your library in a React app but I'm facing a weird import issue at compile time only. When I run `REACT_APP_API_URL=http://localhost:8000 react-app-rewired start` it works,…
-
Under normal circumstances, the connection prompt is
```shell
connecting....._____....._____
```
This may take a long time, but at least the connection will be successful.
When the flash is e…