-
#### Set camera focus value based on X/Y position of printhead
First off, great plugin, it's fast and works great! Would you consider adding a feature to automatically set the correct camera …
-
#### If this is a feature request describe it here
It would be nice to be able to specify a custom codec for ffmpeg. For example, I am running OctoPrint on an NVidia Jetson Nano and have a ve…
-
#### If this is a feature request describe it here
___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: V0.40
#### Version of Octo…
-
#### If this is a feature request describe it here
___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: Octolapse 0.4.0
#### Versi…
-
#### If this is a feature request describe it here
___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: Octolapse v0.4.0
#### Versio…
-
Hello,
as far as i could understand (im new to python)
the folloing code is where the color change comands go
elif command == COLOR_CHANGE:
write_string_utf8(f, "M00\n")
now, if y…
-
#### If this is a feature request describe it here
Settings for Cura can be imported by adding a special G-Code template. IdeaMaker also has the ability to insert settings into a G-Code snip…
-
#### If this is a feature request describe it here
___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: 0.4.1
#### Version of Octo…
-
### Version
Version 2.4.1-beta1+win64
### Operating system type + version
W10 64-bit
### 3D printer brand / version + firmware version (if known)
Should not matter
### Behavior
gcode subs…
-
When milling a PCB board and drilling the holes a person changes drills exactly ten million three hundred and fourty seven times. Right now M6 is ignored. Can we get UGCS to pause sending new g-code…