-
Hi,
I received a FS2011 from aliexpress and the board revision seems to be slightly different (e.g. buzzer, tube location + some components), plus the cpu is different
GD32F103
C8T6
CDU1310
DJ221…
-
### Tool
nanoff
### Description
My device from "Freenove Super Starter Kit for ESP32-S3" is not found in the list of devices
### How to reproduce
1. I execute
`nanoff --target ESP32_S3_BLE --se…
-
In continuation of https://github.com/Candas1/Split_Hoverboard_SimpleFOC/issues/5
I have added the needed code to my cloned fork but can not push because Github_Desktop hangs and therefore can not …
-
Today, on commit:
* 27fa6d9163 - (HEAD -> main, upstream/main, upstream/HEAD) samples: littlefs: add support for H3ULCB and Salvator XS M3 (3 hours ago)
west update produce some error logs:
**…
-
Hello,
I followed the guide using the `dfu-util -d 28e9:0189 -a 0 -D Pinecil_FR.bin -s 0x08000000:mass-erase:force` command, but with the `mass-erase:force` option dfu-util doesn't work, it gets th…
-
### Describe the bug
[mf289f.log](https://github.com/openwrt/openwrt/files/13552500/mf289f.log)
Openwrt gets stuck during boot. See the attached log.
### OpenWrt version
r24564-78d259e7d2
…
-
Maybe someone might have a hint for me...
After finally getting my ftth line activated by the ISP I was able to access the module on 10.10.1.1 (it sits in a MikroTik RB2011 router), no access befor…
umatz updated
4 months ago
-
I wanted to read firmware from the chip with markings:
'GigaDevice
25LB128DSIG
AP2E625
HH2045'
It seemed like it wasn't supported, and I didn't have much experience, but I thought I could add sup…
-
### Description
There some Artillery Genius PRO or X2 that are not able to flash the LCD firmware.
### Steps to reproduce
Try to flash as usual
**Actual behavior**
MKSTFT28.bin is not d…
-
Howdy, I finally got around to removing the old MIPS MCU (good riddance) and have successfully flashed STM32Duino.bin and my own klipper.bin to the specified ROM locations. However, I'm not getting a …