-
### Discussed in https://github.com/springfall2008/batpred/discussions/887
Originally posted by **mtaylor819** March 28, 2024
Hi there,
I have a Solar array going into a Powerwall 2 via a S…
-
Just upgraded to 8.4.1 from 8.3.x but cannot start due to a crash on minute_data_load
```
2024-08-30 09:45:00.034793 INFO pred_bat: --------------- PredBat - update at 2024-08-30 09:45:00+01:00 with…
-
TLDR; setting the battery_charge_rate to zero to prevent charging requires Eco to be turned off to function correctly.
It would appear that setting the givtcp_..._battery_charge_rate to zero no lon…
-
I'm 99.9% certain this is a bug, because the code is clearly written to catch this sensor and make it a `measurement`, but instead it gets labelled `total_increasing`, which is definitely incorrect (t…
-
Failed to connect to the inverter. The error appears when adding the device in devises and services.
I have a 13.5kW All In One and it has 2 IP addresses, one for the inverter/Battery and one for t…
-
I have an issue where when discharging to the grid at full power (2600 kWh) the dot speed stays slow. All other dots speed up, such as charging from the grid to the battery but not the battery to grid…
-
**Describe the bug**
'load actual' in predbat is much higher than the GivTCP sensor value.
History of predbat.load_energy_h0
![image](https://github.com/springfall2008/batpred/assets/58569471/04643…
-
**Describe the bug**
Pretty drastic plan changes every 5 minutes, some of which are notably more expensive than others. Plan changing during slots so very spiky charge profile and over charged this mo…
-
Hello
So it works fine for a few days but then stops working...
Added 0 rows to database table sensor_givtcp_ch2330g177_load_energy_today_kwh
Stored dataset in database and retrieved full histo…
-
**Describe the bug**
Freeze charge from the plan used to work very well for agile prices that were reasonably cheap but not worth using for charging. My last successful freeze charge was on 21/7/24.
…