-
I'm using this project to generate stationary GPS data and a HackRF One to transmit it. My goal is to test geofencing functionality.
I expect my receiver (a u-blox MAX-M8Q module) to get stationar…
-
I am in a situation where I have several devices providing numbers for the same data. For example, GPS position can be provided by 2 devices (ZG-100 GPS, VisionMate AIS). I only trust the data from th…
-
您好，非常感谢您的开源分享。关于Tokyo Dataset UrbanNav-TK-20181219的学习过程中，我在您提供的Tamagawa-seiki TAG264文件中没有看到TAG264相关的信息。想咨询一下关于Tokyo Dataset所使用的imu的一些参数，例如随机游走、偏置标准差和相关时间。
arw（ deg/sqrt(hr)）、 vrw（m/s/sqrt(hr)）、gbst…
-
I am trying to write a test to read a PX4 messages. Im running PX$ in SITL with Gazebo and the MicroXRCEAgent. I can see the topic "/fmu/out/vehicle_gps_position" and echo the data. When I run the …
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
Related to #1088. When I stop moving for a few minutes (with GPS on) I see suspicious linear interpolation for every metric:
_Red is HR, blue is speed, green is elevation._
If the phone is…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…