-
### Describe the bug
The copter does randomly disarm in flight and it looks like the flight control is frozen. Unplug and connect it again does make it working again. The hardware must be okay, becau…
-
# Description
The requirements for the GPS receiver are in the following issues:
1. coloradocube/balloonsat#4
2. coloradocube/balloonsat#12 (also see #8)
3. coloradocube/balloonsat#50
4. colora…
-
```
This will make the arduino set the GPS receiver to 57600baud 10Hz every time
the arduino starts:
////////////////////////////////////////////////////////////////////////////////
////////////////…
-
```
This will make the arduino set the GPS receiver to 57600baud 10Hz every time
the arduino starts:
////////////////////////////////////////////////////////////////////////////////
////////////////…
-
```
This will make the arduino set the GPS receiver to 57600baud 10Hz every time
the arduino starts:
////////////////////////////////////////////////////////////////////////////////
////////////////…
-
Would it be possible to add the lat/lon/altitude fields of the receiver to the ChaseMapper JSON output?
The receiver has a GPS receiver and the data should be available on each balloon transmission s…
-
The autopilot firmware(s) support dual GPS (redundant GPS with blending). We should be able to see the details of both GPS receivers in the toolbar and the info box when clicked. There are lots of G…
-
There is something odd going on when Signal K is reading NMEA 2000 before hooking up to any satellites, see also the attached picture. SK is sending a speed although no satellites are detected. The GP…
-
Currently, Mergin Maps supports a connection of external receivers through basic Bluetooth technology.
Basic Bluetooth API is supported on Android, Windows, Linux and Mac, but not on iOS due to secu…
-
The issue mentioned in https://nuand.com/forums/viewtopic.php?t=3792 was apparently never created, so I'll do it now - the only test using BLADERF_META_STATUS_UNDERRUN is the digital loopback test, so…