-
I want add HC-SR501 PIR Motion Detection to the sonoff, so I set GPIO14 to 09switch1, set GPIO1 to 10switch2, set SwitchMode to 0, set SwitchTopic to 1. I add the switch to GPIO14, and PIR to GPIO1.
…
-
https://www.ebay.com/itm/5pcs-Mini-IR-Infrared-Pyroelectric-PIR-Body-Motion-Human-Sensor-Detector-Module/222218187242?epid=595198651&hash=item33bd3c71ea:g:5DkAAOSw6n5XrvZx
looks like they only need…
-
Hey guys,
I am coming to you after lots of efforts to figure this out but i seem to be missing something.
Setup:
- Sonoff module embeded inside the light fixture.
- Wall switch turns Sonoff m…
-
Hi, I have a problem with my motion sensor HC-SR501. I have successfully added it into homebridge and also in Home app in my iPhone. In app it shows that motion sensor is ready, unfortunately it doesn…
-
Hi Folks. First, and foremost, thank you all for your development efforts on Tasmota!
I will try to be brief with my issue...
I am setting up some sonoff basics. My target configuration is they …
-
I just need a very simple MOTION SENSOR. Is there no one existing as plugin? Just want to check the motion by an GPIO.
Has anyone a hint?
-
If I connect a PIR sensor to one of the GPIO ports to control the realy, is it possible to configure the Sonoff (maybe using rules?) to only detect the movement between certain times of the day.
P…
-
Hello everybody. I have soldered a motion sensor rcwl-0516 to an ailight bulb, Gpio1, GND and 3,3V. It works fine but all external switches I set to Gpio1 are switching the bulb so I can not use it fo…
-
Tested with Electrodragon SPDT module.
Flasched ESPEasy: working.
Flasched Tasmota 5.12.0c: working.
Flashed Tasmota sonoff6.1.1c: Wifi only working for short times, mostly no ping answer.
Ping s…
-
Maybe I oversee something so I report it not as a bug:
Rule1":"ON","Once":"ON","StopOnError":"OFF","Free":438,"Rules":"on Switch2#state do publish domoticz/in {"idx":61,"nvalue":%value%} endon
w…