-
Hello,
I would like to annotate over frames coming out of mlx90640 thermal camera using OpenCV. It is connected to the GPIO of the raspberry pi using I2C interface protocol. Seems like Opencv can …
-
We need a good way of interfacing with the Jetson Orin Nano's peripherals and pins. There exists a similar crate for generic Jetsons `jetson-gpio`, but I think its best if we build this from the groun…
-
The boards differs from version to version.
- In AFCv2 the "mux" should be done by changing pin function
- In AFCv3 and AFCv3.1 i2c mux chip has to be controlled.
Additionally I would like to add i2c…
-
### Port, board and/or hardware
STM32. STM32F411CEU6. aka the BlackPill.
### MicroPython version
MicroPython v1.20-0-326-gcffcce4b53 on 2023-07-26; WeAct Studio Core with STM32F411CE
Also, I reb…
-
#### Type of Raspberry Pi
#### Linux Kernel version
5.4.0-139-generic
kindly suggest a version of luma that can work with linux ubuntu. might be timing or handhake. using oled 128x32
…
-
The ESP32 is connected via the I2C bus to the STM32 but neither side has the firmware written to allow for communication. If there is time implement a way to identify message types. I would recommend …
-
### Creating a bug report/issue
#### Required Information
- DietPi version | 8.15.2
- Distro version | bullseye
- Kernel version | `6.1.11-meson64 #23.02.2 SMP PREEMPT Sat Feb 18 00:07:55 UTC 20…
-
# Required information
* Camera board id: 30678
* OpenIPC version: 2.4.03.21-lite
* Commit: 5e19ba2
* Branch: master
* Tag:
* installation method: uboot upload
* modified majestic.…
-
Managed to aquire one D2 on as is returns on official anycubic ebay that seems to be working fine.
I want to use @sn4k3 [Klipper-MSLA](https://github.com/sn4k3/klipper-msla ) branch to controll a c…
-
```
À développer pour la version 0.2
```
Original issue reported on code.google.com by `patrice....@gmail.com` on 20 Jun 2013 at 6:38