-
u-boot has basic support for the luton26, including [networking support](https://gitlab.denx.de/u-boot/u-boot/-/blob/master/arch/mips/mach-mscc/phy.c).
It is possible to build and boot u-boot on th…
-
Hello,
I am using NixOS on my guest machine, and I am experiencing some graphic related issues. Those issues seem to be related to chromium and electron (vscode) as I could see it only in those appli…
-
flashed with the latest download from GitHub
* exact camera hardware:
XiaoFang 1S
### Description
The camera won't connect to the wifi.
### What did you do to debug the issue
My …
-
I loaded and it was successful... Except...when the SD card is in the device it locks up and you can not see the IP address ...There is no access to the camera at all...Just to note...I am not very go…
-
One of the biggest disappointments for many people on the wyze doorbell cam was that it doesn't have a microsd for local storage. If we can mount a nfs share identical to how we are doing now it can …
-
Majestic exits with segmentation fault when motion detection is on.
Processor t31l Family t31
Sensor gc2083_i2c
Flash 8 MB
```
Firmware
Version 2.4.06.30-lite
Build maste…
-
It seems that tinygo doesn't not support MIPS based embedded devices out of the box, although LLVM does support the following:
```
mips - MIPS (32-bit big endian)
mips64 - MIPS …
-
I followed the guide on here to switch to OpenIPC. Booting to the card worked, I heard the audio prompts saying it was flashing then it said it was rebooting. After the camera rebooted it no longers b…
-
いつもツールを使わせていただいています。
ATOMCAMのアプリケーションにある、ナイトビジョン機能の「ナイトビジョン用赤外線ライト」のOn/Offの機能をWebインターフェース上に機能追加をお願いできませんか。
広範囲に夜空を撮影する場合にナイトモードを使いますが、赤外線ライトが点灯してると、虫が寄ってきて、白く映ってしまうため、Offしたいのですが、アプリで操作が可能なのですが、手軽に…
-
I flashed my Wyze v3 (T31x) via wz_flash-helper with:
- latest u-boot from @gtxaspec u-boot-ingenic repo
- openipc_t31x_kernel.bin and openipc_t31x_rootfs.bin from [this post](https://github.com…