-
Today my inverter was offline for many hours (9:00-18:00) and I noticed some interesting behavior:
When the connection is re-established, the inverter not only sends its current data every 5 minut…
-
We should likely move away from the bootstrap solution and instead create a settings file in json(?) this could accommodate more settings than the inverter also (possibly even the registers of the inv…
-
In my setup I don't have a DTU to control my HM800 inverter. My 4 panels are directly attached to my SF Hub 2000 with 1 AB2000 battery.
I understand that using the inverter for output control is qu…
-
Is it possible to delete or reset the "Yield Total" score? If I change the Yield Correction at inputs, it looks wrong.
And: Is it possible to unlock the HM600 to 800W like an HM800? Online, some gu…
-
Hi, great work on this project, but I don't seem to get any values...
I have put this same question in darrylb's project...
When looking into the serial log, it seems to be connecting, as it is sh…
-
To operate the inverter from the main FSM, we need the pod operation program running on the main Raspberry Pi to communicate with the inverter control running on the Pi Pico. We can use serial communi…
-
### Describe the bug
I do have a setup of 2 inverters, a SE battery and the SE Backup interface. The primary inverter, a SE-10K-RWB48 has the device id 1. The second inverter, a SE-5K, which is conne…
-
## Todo
- [x] Add the setting to hub4control
- [ ] Add the setting to gui-v1
- [ ] Add the setting to gui-v2
## Background
In a system with both a Multi/Quattro and PV inverters, and wher…
-
**Is your feature request related to a problem? Please describe.**
Looking at the code it seems that predbat doesn't subtract the iboost power from today's load in the same way that it does for car c…
-
**Github username:** @0xShax2nk
**Twitter username:** 0xShashanks_07
**Submission hash (on-chain):** 0x9aec5bf94d610c96126661486521c8d3124b77513f19a97df9ea0b9f5a6712dd
**Severity:** high
**Descripti…