-
Hi Petr.
I run the lorawan-server in docker.
I've configured 3 gateways (Kerlink, PROD_FW=wirmaV2_wirgrid_v2.2, LORABOARD_TYPE="868-27dBm") to this host and saw log messages like:
```
11:26:33.966…
-
It could be great to add more monitoring fields to gateways.
In our case, we are monitoring cpu load, ram % use, bandwidth, packet losses, and two temperatures.
This could be achieved by adding a rep…
-
Hi,
Sorry if this section is not suitable to leave messages about problems we encoutered while following your tutorial but I don't where I can leave my messages (is there a forum?).
I tried following…
-
I'm using a Kerlink SPN base-station, I'm using a private LoRa network and am trying to connect my SK IM880A.
When the network mode is set to public the connection is successful, but when I set it to …
-
Hey!
One of my kerlink GW is inside a building for now and can't get a GPS signal... Is there a way for me to fix its GPS location for now ?
-
In the class_b node code (feature), how to make nodes into class_b? Start beacon_pkt_fwd gateway. Now test node or class_a.
-
I am using v4.1 stack for my Lora modem implementation.
I have enabled ADR and is using confirmed msgs.
I am using a kerlink gateway and Loriot server.
This is what I find when sending a lot of data …
-
While testing my SK-iM880A I found two issues:
1. (minor)
The project file includes the classA "main.c" in stead of the classC "main.c".
2. (major)
While using the Class C mode I find that the d…
-
I might be wrong here but to me it seems the TTN gateway server is responding wrong to my PULL_DATA requests sent by my Kerlink, causing:
INFO: [down] the last 3 PULL_DATA were not ACKed, exiting app…
-
My hardware are ic880a and raspberry pi, They are connected through SPI. I modify the lastest code a little(add the reset pin control). I tested the SPI write function with the logic analysor, it wor…