-
It seems KiCAD 8 changed the file format enough that KiUtils opening, parsing, and saving a PCB will corrupt it and prevent it from being opened.
To replicate:
1. Open a KiCAD 7 PCB in KiCAD 8,…
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to https://colab.research.google.com/drive/133ftiEI1jES1ZS2gLGp…
-
The holes where the headers for the RP2040 Zero measure 0.762 mm in diameter (according to Kicad). It seems that some square-y pins measure 0.62 mm (per side), so there should be plenty of room for th…
-
We follow Kicad Library Convention, but there are some breaks from this.
These need to be documented.
As mentioned in PR #4 header footprints are the origin/anchor at the geometric center of the p…
-
I started to create the footprints for the RPi symbols. Symbol Issue: https://github.com/KiCad/kicad-symbols/issues/1772
There was a previous discussion here: #1064
I first looked over the existi…
-
Poking around, I haven't found a general cherry keyswitch library for KiCAD other than this one.
I've been working on generalizing the component library you use in the tutorial, with an eye to making…
-
Writing a template to depend on `zstd-devel` (removed in d481489dae9449f5212f4e2b5fab74e858962242) should fail because `srcpkgs/zstd-devel/template` doesn't exist. Instead, if it's still available in …
-
As Wayne reported [here](https://lists.launchpad.net/kicad-lib-committers/msg00547.html), there are some invalid footprint associations in Amplifier_Audio.lib which need to be fixed. They're old refe…
-
During my inspection, I've found which several footprints in SD_Connector library have wrong orientation. KLC F4.2 states: "Footprints should be oriented such that Pin 1 is located in the upper left c…
-
KiCad provides board 3D view/export functionality, which would be very useful for creating ZeroPhone cases. However, for many components used by ZeroPhone there just aren't suitable 3D models. What's …