-
EDIT 2: resolved, for anyone who faces this issue in the future: simply comment out the 3 software spi lines and use “spi_bus: spi4”.
EDITED to focus on key problem:
Using this component configura…
-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
As i am looking to swap my ultimaker 2.14 board i a have more of a question than an Issue:
instead of replicating the ultimaker preamp circuit for the PT100 is it not possible to play with the confi…
-
Hi,
I cant have working together 2 SPI devices on the same bus (esp wroom 32) :
- TFT ST7735
- Max31865 (from adafruit like board) for temperature reading
Individually, the 2 devices are worki…
-
I just recently got the SKR V1.3 for the wiring simplicity and 32 bit stuff. Sadly, this has also created a few issues. The SPI jumpers are in the correct places and the +5V is in INT like it is suppo…
-
I was building this for my SteamDeck and noticed that during compiling, it was building things like drivers for Wifi Chipsets the Steamdeck doesn't have, as well as things like Nouveau.
Would it ma…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When set to hardware SPI and sharing CLK/MISO/MOSI with the SPI1 header (onboard SD car…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Is your feature request related to a problem? Please describe.
Currently the code has 6 references to `archive/master.zip` in `features.ini`: https://github.com/MarlinFirmware/Marlin/blob/11f98…
-
Hi! Any plans for adding support for this device: https://www.analog.com/media/en/technical-documentation/data-sheets/max31865.pdf ?