-
In trying to simulate a crude wing in 2-D, I always seem to have flow that detaches from the top of the wing. This happens with low and high reynolds numbers and with low and high viscosities and very…
-
### Description of the bug
When you open the Slicer and then drag and drop the STL file into the slicer you will see it's outside the print area and if you click "Arrange" the slicer exits.
### …
-
### Your question
1. 请问为什么 sofaboot-dependencies 的sofa-rpc-all一直固定在 5.8.3,目前我们使用的sofastack对应版本为:
```xml
com.alipay.sofa
sofaboot-dependencies
3.20.0
3.20.0
…
-
It would be nice to export the design to a CAD / 3D modeller software so as to be able to 3D print (or eventually cast) some parts.
I have an [on-going code repository for IceSL export](https://git…
-
Hello, this dataset lib is quiet helpful.
But the simulation name makes me confuse.
For example, https://github.com/Extrality/airfrans_lib/blob/1e7823bc079c2e645a5f8e32179c014df529aec6/README.md?p…
-
Hello,
I'm trying some validation using swiftBlock, like https://www.cfd-online.com/Forums/openfoam-solving/232980-validatation-naca-0012-ofv2006-lack-precision.html
The naca0012 at 3° is set, the c…
-
https://mp.weixin.qq.com/s/tsg8Dxutc43U2EEtw1eDcA
ixxmu updated
8 months ago
-
Looking at the zlin50lx.tmd file, the main wing root/tip airfoil is uniitialized with
This means basically the wings do not provide any lift at …
-
The Stearman does not fly correctly. I suspect part of the problem is that the airfoils are for all intents and purposes are totally undefined.
From the stearman.tmd file:
// airfoils
…
-
I cannot believe this is correct perfomance but I attempted to simulate a engine failure (throttle at full idle) glide with the Wilga and it basically flys like a brick in both NACA 2415 and NACA 4412…