-
## Description
George V. found that the GEFS EP5 test case does not reproduce with different number of ATM MPI tasks when he was testing scalability of GEFS. Further investigation showed that the tes…
-
## Description
Attempts to run using ucx rather than slingshot for an RRFS configuration have led to failures when the model begins to start integrating. The failures are similar in appearance t…
-
## Description
In the current atmosphere history files in UFS, the tracers are output as the mixing ratio against the total air mass including the cloud hydrometers. While the pressure fields are out…
-
## Description
The `regional_atmaq_debug_intel` test is consistently failing due to time limits now. Increasing from the 45 minute time limit to 1hr is showing to be insufficient on Hera.
### To…
-
## Description
The rt.sh is complaining about old modules and not run on Orion. I wonder if Orion is supported by UFS Weather Model or not at this point.
### To Reproduce:
What compilers/machines…
-
All of the ESMF_VERSION_* symbols are available as parameters via
"use ESMF" in Fortran code. This is documented under
https://esmf-org.github.io/dev_docs/ESMF_refdoc/node9.html#SECTION0901610000000…
-
- Current bulk formula in NEMS mediator has been used for fluxes over the sea ice.
For solving the SST increasing issue CFSR/GEFS fluxes with DATM-MOM6-CICE5,
it is needed to use the bulk formula o…
-
Similar to #297 and #298 it appears the Buster packages are missing from the repository for the **armv7l** platform.
Hope it's not too much trouble to fix this.
Thanks!
Robbie
-
## Description
Testing the develop branch on hercules, these tests now fails with the following:
```
150: WARNING from PE 0: Unused line in INPUT/MOM_input : ODA_INCUPD_NHOURS = 6
150:
10…
-
## Description
CICE6 runs on the B-grid unless C-grid is specified. Velocities are located on the corners. MOM6 runs on the C-grid and velocities are located on the E and N faces. For exchange of…