-
I love the Project and it works well with my Cyclone IV Dev Board. Now with my CYC1000 Board with external RAM the NIOS Core doesn't work with the EPCS and would need an EPCQ instead. Could somebody t…
-
---
Author Name: **Frederic Requin**
Original Redmine Issue: 1411 from https://www.veripool.org
Original Assignee: Frederic Requin
---
Hello,
I am using the excellent tool SRecord v1.64 (http:/…
-
r2 -a 6502 -b 8 smb3.nes
asm.arch: cannot find (6502)
Cannot set bits 8 to 'x86'
-- Can you stand on your head?
[0x00000000]>
-
Hi,
Thanks for the great example. I was able to run your SDRAM controller demo from the Quartus II successfully. However, when I tried to modify your example, I ran into problems.
First of all, c…
-
Add items as required
--------
- [x] Major enhancements:
- [x] Pre RC1 Steps
- [x] Verify that all external components and external dependencies are up to date, for example
- mbedTLS
…
-
VGA를 8bit Gray Scale로 변환하는 방법에 대해 알아본다.
소프트웨어가 아니라 Qsys를 이용하여 수정하도록 한다.
-
# 1 . 개요
---
#1 이슈를 보면, 친절하게 설명이 잘 되어 있지만
실제로 따라하기엔 시간을 상당히 오래 잡아먹기 때문에
수업시간 데모 검사 시간 안에 구현하기엔 무리가 있다.
그래서 일단 필요한 파일만 깃 허브에 올리기로 한다.
다음은 우리의 항공대 19년도 1학기 임베디드 시스템 설계 및 실습 GIT의 사용법이다.…
-
```
Lab : Ubuntu 17.04 x64
Kernel : Linux lab 4.10.0-32-generic #36-Ubuntu SMP Tue Aug 8 12:10:06 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
```
```
code@lab:~/debug$ radare2 -A -a x86 -b 6…
-
**Issue:**
- The Data Pakcet Protocol ID of 0xF0 needs to be changed to 0x02 (CCSDS Protocol Identifier) to use the LESIA softwares for debug;
- Nowadays this is a hard-coded in the HW;
- It must b…
-
**Issue:**
* The Data Packet Logical Address of 0x50 is fixed, but it may be need to change it for tests and debug purposes;
* Nowadays this is a hard-coded in the HW;
* It must be selectable by SW…