-
First Thanks for the library provided!
I am using the MKR1010 board to read the data from the pulse sensor by using the PulseSensor_BPM_alternative by connecting to 5V, GND, and the signal to A0 pin.…
-
Ive been trying to get the sensor to work with the arduino nano 33 Iot. I understand the sensor is primarily designed for 5v, but working with the arduino uno, it works on both 5v and 3.3v absolutely …
-
`#define USE_ARDUINO_INTERRUPTS true // Set-up low-level interrupts for most acurate BPM math.
#include // Includes the PulseSensorPlayground Library.
// Variables
#define PulseWire A…
-
i download the PulseSensor Playground and try the "Getting_BPM_to_Monitor" example. when the program is upload and execute, even without placing the sensor on the finger it give the output as a heart …
-
Hi - I'm trying to use the pulse sensor with a couple of other sensors and some outputs, but it seems like -- even though I am using the interrupts -- if there's anything much in the loop itself, I ge…
-
there is something wrong with the library.
compilation log below for reference
libraries\PulseSensor_Playground\PulseSensorPlayground.cpp.o: In function `PulseSensorPlayground::PulseSensorPlaygro…
-
So all works good but as I said and now when I want to see BPM number on the TFT. My TFT act wired like it will print different color and the letter "B" will be removed from BPM will be missing and th…
noajm updated
4 years ago
-
Hi I recently got one of the pulse sensors to measure the BPM and most of my values are extremely high (200+) and I can't figure out why. I didn't alter the code much and I've attached my own code bel…
-
Dear PulseSensorTeam:
I would like to activate the PULSE_SENSOR_TIMING_ANALYSIS function in the PulseSensorPlayground library. I´m doing this, following carefully your instructions:
I have a tee…
Jardu updated
4 years ago
-
Just using the simplest code