-
Add charge readout for machines(especially accumulators) and equipment grids(cars/tanks/locomotives) that show percentage(0-100).
An example of how this would be useful is when using electricity from…
-
I preferred the single decimal place readout to the double digit one. Mainly as most lights give a wrong readout during the first cycle but corrects it during the second. This happens more at lower vo…
-
The top metadata information is formatted as a list with 6 items, whereas it should be formatted as a list with 3 items, a definition list, or a table. This results in the readout of "list with 6 item…
-
e.g., when reading out with in SPARSE mode, there's no point in bringing along the padding, which is only relevant for RECTANGULAR readout.
More generally, we should have a definite strategy to mak…
-
The signal readout isn't very good - it's really small and often shows several bars still with a weak signal.
Is it possible to have a bigger, better signal strength readout some how?
-
this method: https://github.com/tashutt/Gampy/blob/main/tools/charge_readout_tools.py#L840-L862
defines the bin edges based on the total span and centroid of the input samples. Sometimes, a bin ca…
-
-
It seems to be a very slow drift of inaccurate measurement but I cannot be truly certain. I know that I frequently catch it 20 to 40 degrees off when I am vigilant about checking it. When I go too l…
-
I noted that on stock FW, the thermistor readouts on my Repetier-Host Mac graph (USB connection) were very noisy. When I switched to Marlin4MPMD FW, the graphs looked rock solid. Now switching to Ma…
see3d updated
4 years ago
-
It'd be extremely useful to be able to be able to have dynamic pressure (Q) in Pascals be a stat that we could have as one of the things to display in KER. Since solar-panels have a rating of how much…