ToyKeeper anduril issues

ToyKeeper / anduril

Anduril 2 Flashlight Firmware and FSM UI Toolkit

GNU General Public License v3.0

245 stars 62 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Question: what are the src dir(s) for hank d4v2 w/ boost, d4v2 2ch, etc.?

#119 jhoblitt closed 4 days ago
4
New AVR32DD20 drivers use the old "reset calibration to 21°C on reset"

#118 bjrolfe opened 5 days ago
2
[PROPOSAL] Probable copyright infringement of tolkien and dc comics

#117 bartoszp1992 closed 1 week ago
7
BUG: Disabling Simple UI at compile time (#undef USE_SIMPLE_UI) also disables all strobe modes

#116 DurvalMenezes opened 2 weeks ago
3
Request: No aux LEDs in Tactical Mode

#115 dirtydancing opened 1 month ago
0
Improved three-channel interface and 3-channel strobes

#114 fwiffo opened 1 month ago
0
Proposal: Improved 3-channel interface (implementation attached)

#113 fwiffo opened 1 month ago
0
Fix handling of DEFAULT_BIKING_LEVEL and MAX_BIKING_LEVEL.

#112 fwiffo opened 1 month ago
0
DEFAULT_BIKING_LEVEL is always set to the maximum

#111 fwiffo opened 1 month ago
0
bugfix: remove dependency on voltage correction for post-off voltage

#110 SiteRelEnby opened 1 month ago
0
Fix issue #107 blocking channel-mode events past 3H on d4k-3ch.

#109 fwiffo opened 1 month ago
0
Fix custom ch fallthrough

#108 fwiffo closed 1 month ago
1
9H to configure channels doesn't work on d4k-3ch or other lights that use custom 3H functions

#107 fwiffo opened 1 month ago
0
Manual: Add channel mode to manual memory

#106 dirtydancing opened 1 month ago
0
Manual: Update options inherited by Simple UI

#105 dirtydancing opened 1 month ago
0
Bug: Manual Memory doesn't work as expected in dual switch lights

#104 fiveseven808 opened 1 month ago
0
Feature request

#103 paulous181 opened 1 month ago
2
Build failed on Sofirn and Wurkkos lights?

#102 fiveseven808 closed 2 months ago
4
Request: SC31T Pro / Tail Clicky flashlight operation

#101 fiveseven808 opened 2 months ago
1
Create a d3aa firmware variant with jumpstart, and fix a bug where channel mode config could be accessed from off if globals config was not enabled

#100 SiteRelEnby opened 2 months ago
3
D3AA emitter specific ramping issue (SST-20 deep red)

#99 jan-Sanku opened 2 months ago
12
PDF / HTML / DOCX manuals from Markdown

#98 class101 closed 1 month ago
9
Fix strobe mode (#94).

#97 fwiffo opened 2 months ago
0
Bug: Jump-start flashes channels that should remain off on dual-channel lights under some circumstances (example fix attached)

#96 fwiffo opened 2 months ago
0
Request: Lower moonlight levels on dual-channel lights (example implementations attached)

#95 fwiffo closed 1 month ago
1
Bug: Can't access strobe mode on dual-channel Emisar D4V2

#94 fwiffo opened 2 months ago
2
Bug: Voltage readout doesn't display correctly <1V (AA lights)

#93 jan-Sanku opened 3 months ago
2
Protect voltage readout against modification from ISR

#92 SammysHP opened 3 months ago
0
Bug: Voltage readout sometimes mixes digits

#91 jan-Sanku opened 3 months ago
2
Add Wurkkos TS10 RGB with reduced FET output

#90 SammysHP closed 3 months ago
1
Refactor and extend aux patterns

#89 SammysHP opened 3 months ago
0
Request: Add support for 3V batteries

#88 travisce closed 3 months ago
2
Question: For Lightning, is 1H to "Interrupt current flash or start new one" a feature or not?

#87 dirtydancing closed 3 months ago
4
Add emisar-2ch-joined-nofet

#86 SiteRelEnby opened 4 months ago
0
Request: Remove strobes/lightning from "Extended Simple" UI

#85 lukestein closed 3 months ago
1
Request: New Model Number for Single Channel D4SV2 with RGB Switch & FFL351A Emitter/Driver

#84 Gymbow2007 opened 4 months ago
3
Flash in lockout mode with '1h' or '2h' and a low light setting

#83 void-spark closed 4 months ago
12
Allow turning off 'use post off voltage' from device configuration

#82 void-spark opened 4 months ago
0
Bug: Sometimes can’t dim from top of ramp (D3AA)

#81 lukestein opened 5 months ago
6
Adding some model-specific readme files

#80 SiteRelEnby opened 5 months ago
0
Request: Make tactical mode slots stay on after holding the button for X amounts of seconds.

#79 maru801 opened 5 months ago
3
Question: Button LED brightness when ramping

#78 Mugrunty opened 5 months ago
1
D3AA has a bug when manually exiting version check.

#77 maru801 opened 5 months ago
2
arch: attiny1634: Use built-in temperature calibration data

#76 stcarlso opened 5 months ago
1
Request: Don't use Smooth Steps for Momentary Moon/Momentary Low (from lockout mode)

#75 lukestein opened 5 months ago
2
Request: Make Voltage readout decimal place user configurable

#74 Mahir291 opened 6 months ago
1
Avoid overflow of `ticks_since_adjust`.

#73 dpse opened 6 months ago
1
Replace lockout mode with tactical?

#72 Relys opened 6 months ago
1
Discussion: Channel mode and manual memory

#71 SiteRelEnby opened 6 months ago
1
Bugfix (#69): tint_ramp_direction does not get reset when channel mode arg is changed by manual memory

#70 SiteRelEnby opened 6 months ago
0